Hercules Products


	B-Doubles
	Lead B-Double Semi Tippers Rolling, Slide, Fixed or Side Tipping Standard Equipment • Lengths from 6000mm to 9500mm • Volume from 20-50 cubic metres • Construction in Aluminium, Steel or optional Bisalloy • Longmembers, Hercules extruded two piece • One piece Hercules top rails with logo and pin stripes • Tailgate rear hinged, over centre manual controlled bottom opening • Subframe fabricated P & I-Beam type • Rope rails located under side coamings • Shovel rack • Spread chains • Access step ladder and hand grip • Safety prop fitted to side of chassis • Body guides subframe mounted • Subframe in 75x50x4mm RHS • 50mm bright rear pivot bar located in heavy duty hollow bar bushes incorporating grease nipples for easy lubrication • Axles and Suspension supplied by either York, Hendrickson or BPW • Select from Dunlop, Goodyear, Michelin or Bridgestone tyres • Rims Ten Stud or Spider • Hoist, well mounted telescopic type from Delta Hydraulics • Brakes by Air Brake Corp to comply with Australian Design Rules • 12mm full width reinforced skid plate • Holland Hitch 2 speed wind down type landing legs • Fifth Wheel by Holland Hitch 351 Pro-Hitch mounted to subframe • Lights, mudflaps and antispray to full registration requirements • All steelwork cleaned, primed and finished in 2-pack paint of preference Optional Equipment • Pull, Roll or Hooped tarp system • Grain door • Grain locks • Toolbox • Water tank Full 12 month warranty on any faulty parts or workmanship

From basic to custom built, Hercules can design and build a trailer to suit your individual needs. All Trailers are manufqctured to exacting standards using the best available materials. Hercules offers a huge range of light rigids to meet the demands of any contractual requirment.

With modern facilities second to none, Hercules are committed to customer satisfaction.

Download Hercules brochure (1.8mb)


	Light Rigid Tippers
	Standard Equipment • Lengths from 3000mm to 5000mm • Volume from 2-20 cubic metres • Construction in Aluminium, Steel or optional Bisalloy • Longmembers, 100x50x4mm RHS or pressed formed, wide bridging type one piece • Dropsides in Hercules press formed monopanel with corner posts and quick action catches • Tailgate top or side hinged with bottom manual or air controlled opening • Cabguard of heavy duty construction extending up and forward of tipper body, tapered in to suit cabin with two mesh covered rear vision apertures • Rope rails located under side coamings • Shovel rack • Spread chains • Access step ladder and hand grip • Safety prop fitted to side of chassis • Body guides subframe mounted • Subframe in 75x50x4mm RHS • 38mm bright rear pivot bar located in heavy duty hollow bar bushes incorporating grease nipples with four pivot plates • Hoist, twin under body or Delta "Well or Front" mounted telescopic type • Lights and mudflaps to full registration requirements • Tipping body cleaned, primed and finished in 2-pack paint of preference Optional Equipment • Towbar • Toolbox • Water tank • Relocate spare wheel carrier if space available • 24v-12v Voltage reducer Full 12 month warranty on any faulty parts or workmanship


	Semi Trailers
	Chassis Tip Semi Trailers • Lengths from 8000mm to 10400mm • Volume from 25-70 cubic metres • Construction in Aluminium, Steel or optional Bisalloy • Longmembers, Hercules extruded three piece section • One piece Hercules top rails with logo and pin stripes • Tailgate side or top hinged, air controlled bottom opening with provision for manual override • Rope rails • Shovel rack • Spread chains • Access step ladder and hand grip • Safety prop fitted to side of chassis • Body guides built into subframe • 50mm bright rear pivot bar located in heavy duty hollow bar bushes • Axle and suspension supplied by either York, Hendrickson or BPW • Select from Dunlop, Goodyear, Michelin or Bridgestone tyres • Hoist well mounted telescopic from Delta Hydraulics • Tyre carrier single under slung type • Lights, sealed beam type to full registration requirements • Mudflaps, Hercules design to meet requirements • Trailer cleaned, primed and finished in 2-pack paint of preference Tip Over Axle Semi Trailers • Lengths from 9700mm to 12200mm • Volume up to 80 cubic metres • Construction in Aluminium, Steel or optional Bisalloy • Longmembers, Hercules extruded three piece section • Subframe bolted to main beams with rear axle stabilisers • Single or double pivoting arms fixed with 50mm pivots • All steelwork cleaned, primed and finished in 2-pack paint • Brakes by Airbrake Corp to comply with Australian Design Rules • 2 speed landing legs wind down type • 2-3" weld in King Pin type with block • 12mm full width reinforced skid plate • Single under slung tyre carrier • Grain door fitted to tailgate with opening to suit application • Grain locks over centre adjustable mounted through rear corner posts • Shovel rack • Fold down rear access ladder with internal steps • Well mounted telescopic hoist from Delta Hydraulics • Regulation lighting, Full length splashguards, guards and mudflaps Optional Equipment • Pull, Roll or Hooped tarp system • Toolbox • Water tank • Registration can also be carried out Full 12 month warranty on any faulty parts or workmanship


	2,3,4,5,6 Axle Dog Trailers
	Standard Equipment • Volume from 10-60 cubic metres • Longmembers, Hercules press formed, wide bridging type • Construction in Aluminium, High Tensile Steel or optional Bisalloy • Lengths from 4500mm to 11000mm • Floors thicknesses from 6mm to 12mm or stepped as required • Side heights up to 3000mm • Subframe press formed Standard and P-Beam type with bottom flange • 50mm bright rear pivot bar located in heavy duty hollow bar bushes • Hoist well mounted telescopic from Delta Hydraulics • Tailgate top hinged, double acting ram over centre air controlled • Spreader chains • Access Ladder • Subframe mounted body polyp • Safety prop fitted to side of chassis • Lights, sealed beam type to full registration requirements • Mudflaps, Hercules design to meet requirements • Trailer cleaned primed and finished in 2-pack paint of preference • A-Frame drawbar with 50mm Ringfeder eye, quick release fittings, drop down legs and level springs • Single tyre carrier mounted to drawbar or under chassis • Axle and suspension supplied by either York, Hendrickson or BPW • Select from Dunlop, Goodyear, Michelin or Bridgestone tyres • Brakes by Airbrake Corp to comply with Australian Design Rules • BPW Double row ballrace • Double acting air cylinder and flap to lock turntable Optional Equipment • Pull, Roll or hooped tarp system • Grain door • Grain locks • Shovel Rack • Anti spray • Toolbox • Water tank • Rock sheets/rails • Registration can also be carried out Full 12 month warranty on any faulty parts or workmanship